Brass In CNC Machining

Provide manufacturing process, metal, and plastic instructions to meet the specific requirements of your CNC machined parts.

China machining parts manufacturer Factory quality management certification system mark

Brass

H59 Brass CNC machining

H59 brass is the cheapest brass, high strength, hardness and good plasticity, but in the hot state can still withstand pressure processing well, corrosion resistance is general, other properties and H62 is similar.

H62 brass Copper CNC machining

Common brass, has good mechanical properties, good plasticity in the hot state, plasticity in the cold state can also be, good machinability, easy brazing and welding, corrosion resistant, but prone to corrosion rupture. In addition inexpensive, is a widely used variety of ordinary brass. h62 (i.e. four-six brass). The β-phase is much harder than the α-phase at room temperature, and thus can be used for parts subjected to larger loads.

T2 Copper Copper CNC machining

It has good conductivity, thermal conductivity, corrosion resistance and processing properties, and can be welded and brazed. Contains less impurities that reduce the conductivity and thermal conductivity, and trace amounts of oxygen have little effect on the conductivity, thermal conductivity and processing properties, but it is easy to cause "hydrogen disease" and is not suitable for processing (annealing, welding, etc.) and use in a reducing atmosphere at high temperatures (e.g., >370°).

T3 Copper Copper sheet CNC machining

T3 copper has good electrical conductivity, thermal conductivity, corrosion resistance and processing properties, can be welded and brazed. However, it contains more impurities that reduce conductivity and thermal conductivity, and the oxygen content is higher than T2, which is more likely to cause "hydrogen disease" and cannot be processed (annealed, welded, etc.) and used in high temperature (e.g. >370℃) reducing atmosphere.

Why Choose V1 Machining

Our goal is to be your reliable partner. What we are pursuing is a long-term cooperative relationship.

Offering a wide range of parts to be machined, you will receive reports just as if you were in our factory.

16 years experience in machining metal parts

V1 Machining is a ISO9001:2015 and ISO 14001:2015 and IATF 16949 certified company

Advanced equipment and professional testing, experienced engineer team

Digital scientific management to promote efficient operation of teams and suppliers

Leave A Message

    Metal Materials For CNC Machined Parts

    We have our own strict standards for the materials we process. However, we will also provide materials that meet the standards according to the needs of our customers. In general we often use the following materials.

    Scroll to Top